H3C基于源地址策略路由怎么配置，为帮助大家学习H3C路由，yjbys小编为大家分享H3C基于源地址策略路由配置实例，快来学习吧!
system-view
System View: return to User View with Ctrl+Z.
[H3C]acl
[H3C]acl nu
[H3C]acl number 2000
[H3C-acl-basic-2000]rule permit source
[H3C-acl-basic-2000]qu
[H3C]route-policy aaa permit node 0
%You are modifying this sequence
[H3C-route-policy]if-match acl 2000
[H3C-route-policy]apply IP-address next-hop
[H3C-route-policy]qu
[H3C]int e1/0
[H3C-Ethernet1/0]ip policy route-policy aaa
[H3C-Ethernet1/0]qu
[H3C]save
[Master-GigabitEthernet1/0/33]qos apply policy ceshi inbound
5500系列
重定向至下一跳典型配置指导
# 定义基本ACL 2000，对源IP地址为的报文进行分类。
[Switch] acl number 2000
[Switch-acl-basic-2000] rule permit source 0
[Switch-acl-basic-2000] quit
# 定义基本ACL 2001，对源IP地址为的.报文进行分类。
[Switch] acl number 2001
[Switch-acl-basic-2001] rule permit source 0
[Switch-acl-basic-2001] quit
# 定义类classifier_1，匹配基本ACL 2000。
[Switch] traffic classifier classifier_1
[Switch-classifier-classifier_1] if-match acl 2000
[Switch-classifier-classifier_1] quit
# 定义流行为behavior_1，动作为重定向至。
[Switch] traffic behavior behavior_1
[Switch-behavior-behavior_1] redirect next-hop
[Switch-behavior-behavior_1] quit
# 定义类classifier_2，匹配基本ACL 2001。
[Switch] traffic classifier classifier_2
[Switch-classifier-classifier_2] if-match acl 2001
[Switch-classifier-classifier_2] quit
# 定义流行为behavior_2，动作为重定向至。
[Switch] traffic behavior behavior_2
[Switch-behavior-behavior_2] redirect next-hop
[Switch-behavior-behavior_2] quit
# 定义策略policy，为类classifier_1指定流行为behavior_1，为类classifier_2指定流行为behavior_2。
[Switch] qos policy policy
[Switch-qospolicy-policy] classifier classifier_1 behavior behavior_1
[Switch-qospolicy-policy] classifier classifier_2 behavior behavior_2
[Switch-qospolicy-policy] quit
# 将策略policy应用到端口GigabitEthernet 1/0/1的入方向上。
[Switch] interface GigabitEthernet 1/0/1
[Switch-GigabitEthernet1/0/1] qos apply policy policy inbound
